"The only reason it should automatically start is if you have the template scheduled.'
Yes, is scheduled to run when booting from NET PXE, as I understand now, this should replace the USB Boot, then it should open the landesk user interface, since the NET PXE does not work, as soon as I used the USB Boot it runs the scheduled task.
"Your PXE issue is most likely cased by a configuration issue.
Check the required DHCP options are set. Unless you are using an IP helper setup the PXE rep will also need to reside on the same sub net as the machine being booted.
All machines are in the same subnet/Gateway. The PXE is part of a domain, the bare server is not, I don't think this matters does it?
I have also seen a bios update on the client machine resolve a PXE error. Or test a PXE boot on a different model of machine if you have one available just to make sure it isn't an issue specific to that machine.
I have updated the BIOS on both the bare metal machine and in the PXE reps.
Still the same problem, after installing WIN 7 Pro 64, I still can not Boot from PXE. Any other suggestions?
Thanks for the replies, I really appreciate your input.