Re: Issues Capturing Gold Image
Did you happen to verify these settings: Issue: Capture Image or Deploy Image Action Fails
View ArticleRe: Issues Capturing Gold Image
dwagner1 I did verify those settings. My log does not show any of those error messages. I am able to map to it. The capture starts but then immediately stops saying it could not write the file to...
View ArticleClik here to view.
Re: Issues Capturing Gold Image
That sounds like a rights issue on the share. Manually map to the share while in PE and see if you can write to share.
View ArticleRe: 9.6 SP1 - Provision OS use multicast
We found the template need to change how the drive was being partitioned and also found we had missed putting server in as FQDN in the image path in at the same time. We changed from the custom...
View ArticleBandwidth and provisioning
We've been having issues with imaging taking a long time even when multicasting. Landesk does not seem to be using all of its available resources and our network monitoring although limited always...
View ArticleClik here to view.
Re: Bandwidth and provisioning
The default delivery method for a scheduled provisioning task is "Standard policy-supported push distribution" which is set at 50% bandwidth. If you PXE boot the default is "Allways listed for...
View ArticleRe: Issues Capturing Gold Image
I can manually map to it. I have searched this error message and everything points to a permission issue but after reviewing the logs and manually mapping to it while in PE I don't have any issues. Yet...
View ArticleClik here to view.
HII Driver Issues
I am having this problem with Intel HD drivers on the Lenovo X230 and the Dell Latitude E6430. Manually installing the drivers using setup.exe works and downloading the drivers and installing them via...
View ArticleRe: Bandwidth and provisioning
Scaled this all the way to 100% no change so far 16 computers are still going 6 hours later It took 2.5 hours for the multicast master to finish caching but nothing was even close to maxing out it's...
View ArticleClik here to view.
Re: Bandwidth and provisioning
Multicast is also throttled by packet delay as well as bandwidth. Multicast will only be as fast as the slowest machine in the communication as all machines have to receive the packets at the same...
View ArticleHow do I migrate templates from a Physical to Virtual Core
HiI have migrated a Landesk 9.0 SP2 physical Core Server to a Virtual server. I have also moved the database to another server. All looks ok with the exception of Provisioning and Distribution. It...
View ArticleRe: Bandwidth and provisioning
Eventually the multicast rep automatically rebooted and the rest according to data traffic logs just defaulted to pulling from the source and saturated the link to that switch. Still waiting on a...
View ArticleRe: Bandwidth and provisioning
Standard Multicast has a bad reputation for flooding a network so for this reason LANDESK built in a packet delay. How many machines are you wanting to image simultaneously?
View ArticleRe: Bandwidth and provisioning
One other solution you could consider is utilizing Preferred Server for remote locations.
View ArticleRe: Bandwidth and provisioning
Right now I am running a testbed of 16 computers but we need to be able to scale up to labs of at least 50 computers and we do have preferred servers per site but we can't exactly have one per switch....
View ArticleRe: Bandwidth and provisioning
You might be thinking about the PXE rep as there is no need for a separate preferred server per switch. An IP address range can also be specified in the preferred server settings. As for...
View ArticleRe: How do I migrate templates from a Physical to Virtual Core
Hi, Are you booting your device with PXE ? You need to deploy PXE from the new core in order the device connect to the right core. Regards
View ArticleRe: Bandwidth and provisioning
Okay a unicast computer took 2 hours to complete the multicast to 16 took 9-10 hours. The frustrating thing is traditional multicasting was taken out in 9.6 when we used to use multicast in ghost it...
View ArticleClik here to view.
Re: How do I migrate templates from a Physical to Virtual Core
HiYes booting from PXE. Sorry forgot to mention, I have redeployed the PXE agent from the new server. When the DOS box appears on the client machine, it connects to the new server. Then you get the...
View ArticleRe: Surface Pro 3 - PXE boot
Is anyone also experiencing slow download times compared to non-UEFI PXE boots? Our Bootx64.wim is 250MB (compared to 200 MB for boot.wim), but it takes "forever" until it's fully loaded to RAM.We have...
View Article