Re: PXE boot media creation
I've seen it on some of my usb devices. I found it worked more reliably on the smaller devices (2GB). Mark McGinnMarXtar Ltd/MarXtar Corporationhttp://landesk.marxtar.co.ukLANDesk Expert Solution...
View Articleusing core server for HII with 9.0 SP4
Hi, I have a question which may seem stupid, but I could not find a good answer. In LANDesk SP4, it seems HII wants at all costs to have a preferred server configured (from the doc I found, it seems...
View ArticleRe: using core server for HII with 9.0 SP4
You just need to configure the Core Server as the preferred server. It is so that it can use UNC credentials correctly when using actions that can make sure of preferred servers. Mark McGinnMarXtar...
View ArticleRe: Deploying Windows 7 images
I just shrink the volume in Windows as the second to the last step in my gold image creation (the last step being sysprep).
View ArticleRe: Provisioning works with PXE, but not with "Boot to Managed WinPE" (boot.wim)
I tried replacing the bootmgr in the boot.img and the bcd file in vboot and the boot ISO still will not boot in a VM. Even replaced the bootmgr file in the vboot folder as well. (of course after making...
View ArticleWindows Startup Repair after Image Deploy
Hi All, We have an existing TBI based image that has been pushed out to out Dell Optiplex 780 machines for the past two years.We typically boot into WinPE Menu, select the specific image and deploy....
View ArticleRe: After upgrading to 9.5 pxe booting to a provisioning template is not working
This did work in v9 before SP2. It was a great feature being able to have one template to work either from in windows or if you boot manually to WinPE but alas it was taken away for some reason.
View ArticleRe: After upgrading to 9.5 pxe booting to a provisioning template is not working
In 9.5 SP1 you will be able to run a template with a vboot action in it from PXE boot.
View ArticleWyse Thin Client Z90s7 boots to PE and waits for IP address.... Driver is...
Recently Upgraded to 9.5 and so far everything is working well except for OSD tasks with our Wyse Z9os7 thin clients. PE loads up and get all the way thru loading the driver and then it times out...
View ArticleProvisioning Template - CTOS does not copy whole ldprovision folder or run...
Hello, I have a Win7 x64 image which has been sysprepped (generalized and audit mode) which used to work, but for some unexplained reason it now does not finish the whole provisioning process No...
View ArticleRe: Provisioning Template - CTOS does not copy whole ldprovision folder or...
There are a number of parts to CTOS that could be involved. Work through this article to see if it helps.http://community.landesk.com/support/docs/DOC-6948
View ArticleRe: After upgrading to 9.5 pxe booting to a provisioning template is not working
Awesome news thank Eric
View ArticleRe: Provisioning Template - CTOS does not copy whole ldprovision folder or...
Hello Eric, and thank you for replying. I had already worked through that article and here were my findings:The unattend file was copied to the C:\windows\panther folderCTOS did not create an entry for...
View ArticleRe: Wyse Thin Client Z90s7 boots to PE and waits for IP address.... Driver is...
Hi,Did you try to re-inject the correct driver and re-deploy your PXE Representative? Maybe you are using an older driver or not for the correct OS version. Plain 9.5 requires a Win7 driver, if you...
View ArticleRe: After upgrading to 9.5 pxe booting to a provisioning template is not working
Hi Eric, Do you know if the vboot action changes in sp1 also include using preferred servers to download the boot.wim file rather than going back to the core?
View ArticleRe: Size of profile causing capture to fail?
The ldprovisioning log on the machine shows: ldprovision.exe reporting action status 5 to core before the deploy profile action fails. Anybody know what that means? In the the deployprofilehandler...
View ArticleError codes in ldprovisioning logs
Trying to get to the bottom of an issue I am having with the deploy profile command in my osd provisioning template using 9.5. The capture profile works fine and the profile can be manually restored or...
View ArticleRe: Error codes in ldprovisioning logs
Maybe this document helps you a bit further... Frank
View ArticleRe: Error codes in ldprovisioning logs
259 is a standard windows error code that indicates no more data is available.http://msdn.microsoft.com/en-us/library/windows/desktop/ms681381(v=vs.85).aspx If you look on the client for the profile...
View ArticleFixwindows failing to work after successfully working the day before
Hello, I have a provisioning template that we were having issues with at the beginning of the week that support helped us fix and got working after patching the core with a followup to fully work with...
View Article