Clik here to view.
Re: Ivanti 2017.3 Provisioning problem with map/unmap drive to preferred server
Are your computers in the domain? And what operating system do you implement? WIN 7, WIn 10?
View ArticleClik here to view.
stuck in running configure agent
Hi, Guys, I met a problem when deploying image on MAC. After netboot by network, chose the template, it will stuck in running configure agent, never will finished or failed message.The log on the core...
View ArticleRe: Ivanti 2017.3 Provisioning problem with map/unmap drive to preferred server
Hello, this OS is Windows 7, on my first Task (system configuration), my computer is not in a Domain. On the Landesk 9,6 SP2, this task run (very well).
View ArticleRe: Ivanti 2017.3 Provisioning problem with map/unmap drive to preferred server
Check accountIn OS image must have the same account and passwordwhat is defined on the Core server
View ArticleRe: Ivanti 2017.3 Provisioning problem with map/unmap drive to preferred server
In the Task scheduler on my Core Server, the account is defines. cdt
View ArticleClik here to view.
Re: Ivanti 2017.3 Provisioning problem with map/unmap drive to preferred server
uncheck:remove client provisioning folderRun provisioning on your computerCheck logs in c: / provissioning
View ArticleRe: how to configure DHCP server or Router to have Landesk as a PEX server
It's a very helpful discussion.Let me fully understand each service functionality then I will know which is my best choice for my network. That PXE representative's job is to pick up the PXE - DHCP...
View ArticleRe: how to configure DHCP server or Router to have Landesk as a PEX server
The Ivanti recommendation is to use CSEP as that is their technology and is supported by them. Whether this recommendation works for you does depend on how your environment works. For example, do you...
View ArticleRe: how to configure DHCP server or Router to have Landesk as a PEX server
Thank you for your times and your detailed explanations.
View ArticleRe: how to configure DHCP server or Router to have Landesk as a PEX server
It's what the community is for - learning & sharing. And folks like MarXtar help make it a great place . Don't be shy about asking things - everyone's had to start at 0 at some point .
View ArticleClik here to view.
Re: how to configure DHCP server or Router to have Landesk as a PEX server
Just on another note we 'have' to use the forwarding model as we use a security product on the network that would require us to add every possible PXE 'server' into a configuration for...
View ArticleTask sequence stops as USB network adapter not installed in Windows 10
I have some HP X2 210 devices. As they are tablet / laptop hybrids they are a bit short of inputs so don't have a network socket. So I have to use a HP USB network adapter. This all works fine and...
View ArticleRe: Task sequence stops as USB network adapter not installed in Windows 10
Out of interest, does windows see the USB device at all before you remove it and plug it back in? Are we talking USB2 or 3? Would you get the same effect as removing and re-adding if you reboot the...
View ArticleUEFI Boot LANDESK Management Console
I am new to Landesk and I am having an issue setting up UEFI. As I have been searching around for solutions, I have seen that on the Management Console under provisioning/OS Provisioning/preboot/pxe...
View ArticleRe: how to configure DHCP server or Router to have Landesk as a PEX server
Ah yes - the joys of "security == compromise between accessibility and not" ... and PXE is a super simple (and thus - dumb) and "not exactly resilient" (to put it mildly) situation. If it helps, you...
View ArticleClik here to view.
Re: Task sequence stops as USB network adapter not installed in Windows 10
Aye - remember that much of the USB3 shenanigans will only work (after a reboot) once the regular USB/USB2 stuff is installed. Could be related nonsense like that?
View ArticleRe: Task sequence stops as USB network adapter not installed in Windows 10
Hi Mark, When I go into Device Manager it appears that Windows cannot see the USB before I unplug and reinsert it. If i reboot before doing that it does then pick it up when going back into Windows...
View ArticleRe: how to configure DHCP server or Router to have Landesk as a PEX server
Indeed and yes I am aware I can lock it down to specific devices. However to me that defeats the purpose of the self electing process and means if that one device fails we are back to square one. So...
View ArticleRe: how to configure DHCP server or Router to have Landesk as a PEX server
You are quite correct in that this makes the resilience of the self-electing aspect moot - but some people / environments need that option, so "it's there if you need it". As I keep saying - there's...
View Article