Clik here to view.
Will not PXE boot using UEFI
Running 2016 SP3 Has anyone out there had a problem where using Legeacy Rom bios setting works fine but UEFI bios settings do not even get the bootx64.wim pushed down?I have tried 2 different...
View ArticleClik here to view.
Re: Will not PXE boot using UEFI
Okay, so we'll start with the easy setting check. In OS Provisioning if you go to Preboot --> PXE Boot Options:Make sure the checkbox for "Always PXE Boot UEFI Devices" is enabled:Otherwise, you end...
View ArticleClik here to view.
Re: Will not PXE boot using UEFI
Make sure ALL the legacy option of off! We had this issue with our new HP EliteDesk 800 G3's and in the end I found that we had to make sure the legacy option were all disabled. We have secure boot...
View ArticleClik here to view.
Re: Will not PXE boot using UEFI
I read where this could help as well especially for newer Dell devices:1). convert disk from MBR to GPTMicrosoft has a tool called MBR2GPT that can do that conversion. I believe that needs to be done...
View ArticleClik here to view.
Re: Provisioning pop up message
Hey if you don't mind can you share how you created the task that reverts the wallpaper. I tried what you mentioned by creating a task that imports a reg file I exported so it changes the value back to...
View ArticleClik here to view.
Re: Deploying: Windows could not parse or process unattend answer file
We received this error when we imaged a new system with a computer name that was longer than 15 characters long.Shortened the computer name to 15 characters restarted the OS Provision task and it...
View ArticleClik here to view.
Re: Landesk 9.5 SP2 and Lenovo P71 Help
If memory serves, 9.5 SP2 utilized the Windows 8.1 version of WinPE - which means you'd have to find a 32 bit Windows 8.1 driver for that device if you're hoping to boot it into WinPE for imaging. I...
View ArticleClik here to view.
Re: Landesk 9.5 SP2 and Lenovo P71 Help
Just as a clarifying point - 9.5 is eons old ... I want to say something in the region of 7-8 years or thereabouts? You should really look to upgrade (though, to be honest, "starting new/clean" would...
View ArticleVboot and Bitlocker
HelloWe normally deploy images by PXE. I'm testing deploying by rebooting a system into vboot and imaging said system.I am running in to an issue where if a system is bitlockered, when it reboots and...
View ArticleClik here to view.
Re: Vboot and Bitlocker
See if this doc helps: How to get Started with Patch and Compliance Manager OR possibly this old discussions: Deploying BitLocker Surface Pro 4 Image and BitLocker
View ArticleClik here to view.
Re: Landesk 9.5 SP2 and Lenovo P71 Help
I want to thank both of you for the information. I ended up having to manually inject the driver and use provisioning. The image deployed but did not configure. I also did that manually to get that...
View ArticleClik here to view.
Re: Landesk 9.5 SP2 and Lenovo P71 Help
There's a bunch of stuff on the community itself that you can use - BKM's, How-to-s ... and so on. But there's also the MOMENTUM video based webinar recordings here - Momentum On-Demand Webinars . Two...
View ArticleClik here to view.
Re: Landesk 9.5 SP2 and Lenovo P71 Help
Thank you so much. We will definitely check these out.
View ArticleClik here to view.
Unable to Sysprep Windows 10 1803
Hi guys, I created a Windows 10 1803 image from scratch, but I'm having an issue with Sysprep. The reason being is because of some of the Windows store apps. I even tried using the PS cmdlet...
View ArticleRe: Unable to Sysprep Windows 10 1803
I've run into this before as well. Apparently it has something to do with the Apps being installed on the system but not in the user and you have to get rid of the app in both places. So you have to...
View ArticleClik here to view.
Re: Unable to Sysprep Windows 10 1803
Wow thanks a lot Robert for sending this to me. I'll give this a shot and let you know. Sysprep was so much easier with windows 7.
View ArticleClik here to view.
Re: Unable to Sysprep Windows 10 1803
I have experienced this issue as well. Several times. It never seemed to really have a solid fix for me aside from one approach. What Robert said is definitely something that had worked for me at...
View ArticleNaming workstations during provisioning
Hi all, How are people handling the naming of workstations during provisioning? On Win 7 we used to run some PowerShell and it worked fine. On Win 10 it seems intermittent at best. The code we use is:...
View ArticleRe: Naming workstations during provisioning
There's a couple of existing threads on this topic, have you checked those out for options (it'd help checking the OS Deployment and Provisioning section ) - for example:About Device Naming...
View Article