Clik here to view.
Re: Capturing a Image Breaks Image Computer
By default it should have "Mark this discussion as a question" checkbox when you start a thread. If you uncheck that box it won't give those options.
View ArticleCapturing an Image within a provisioning template
Hello, Has anyone attempted to Capture an image with a provisioning template? I have been referring to the explanation of the process that is found here:...
View ArticleRe: Capturing an Image within a provisioning template
The OS Installation section is just terminology and does not mean you can only deploy an image in there. You could actually capture an image immediately followed by deploying an image in a backup then...
View ArticleRe: Capturing an Image within a provisioning template
Thanks Mark, I have imaging with Provisioning working great with a Hardware independent image that I layer software onto. Because of the amount of different variations of software as well as several...
View ArticleRe: Capturing an Image within a provisioning template
Just an FYI I got it. It actually was a boneheaded mistake on my part. I had the wrong command line perimeters, once I changed them to the correct ones it works! I initially had them as the...
View ArticleHP EliteBook Folio 1040 G1 PXE Boot
I am trying to PXE boot HP EliteBook Folio 1040 G1 and none of the drivers are connecting to LANDesk Server. I have LANDesk version.9.50.26. The laptop has Intel (R) Ethernet Connection I218-LM netword...
View ArticleRe: Landesk 9.5 sp1 Hii Best Practices
Hi Chad, did you ever figure out what the problem was? I am with Jaren, you might to create the image in Vmware, sysprep and then try aain.
View ArticleRe: Landesk 9.5 sp1 Hii Best Practices
I have been struggling with similar issues. It appears HII is not injecting the drivers even though it completes with success. I have attempted to assign drivers to certain models with no luck and have...
View ArticleRe: Landesk 9.5 sp1 Hii Best Practices
The problem that I was having with Hii had to do with Windows 8.1 and partioning the drive in the provisioning process. In WinPE after the imaging the landesk provisioning wasn't automatically mounting...
View ArticleRe: Landesk 9.5 sp1 Hii Best Practices
I have noticed with 9.5 you have to create a task to specifically mount the partition which was not required in 9. I usually mount the drive as J. The reason I chose a letter farther in the alphabet is...
View ArticleClik here to view.
Re: Landesk 9.5 sp1 Hii Best Practices
Chad.White Here is my configuration to the partition for Windows8. this section is for the "Pre-Os Installation" in my provisioning template (I am attaching the picture) <section id="PreOsInstall"...
View ArticleProvisioning XP Driver Problem
I use Landesk 9.5 No SP I have all Dell Computers. Most of my computers are on Windows 7. I have a few on XP. Several of my XP computers use a Soundmax audio driver. I am trying to convert them over to...
View ArticleMTFTP Server doesn't have an IP address?
So, we swapped out to different switches at the end of last week, which caused all kinds of grief, which for the most part has been sorted out. We were having some DHCP errors, and when I'd try to boot...
View ArticleRe: HP EliteBook Folio 1040 G1 PXE Boot
Do other computers in your environment connect correctly? At what point in the process do you see it failing? Are you booting OSD or using Provisioning? Are you in UEFI or Legacy mode?...
View ArticleRe: HP EliteBook Folio 1040 G1 PXE Boot
All other computers are connecting fine. PXE Boot not getting DHCP IP address I am using Provisioning in UEFI
View ArticleRe: MTFTP Server doesn't have an IP address?
What hardware are you trying to image, if I may ask? Could this be your problem? http://community.landesk.com/support/docs/DOC-3031
View ArticleRe: MTFTP Server doesn't have an IP address?
Hmmm, I don't think so, but I'll give it a try. The machine I'm tryng to image is one that I've imaged many of previously, and I get the same error on an older machine type that I've been trying to...
View ArticleRe: MTFTP Server doesn't have an IP address?
Well if you've imaged that specific hardware before, then that's likely not your problem. Note that you don't want to do those registry changes (ie turning off mtftp) unless you have to. It will only...
View ArticleRe: HP EliteBook Folio 1040 G1 PXE Boot
I'm assuming you are able to get into WindowsPE, but it doesn't get an IP address to connect to the Core Server? I don't have any experience with that machine personally, but I was able to find these...
View Article