Re: LD 9.5.2 Provisioning with GPT
Are you using UEFI for the BIOS? I recently set up a template with GPT and laid it down on a UEFI based laptop. I had it crash after CTOS, but when I removed action that sets a partition as active,...
View ArticleRe: HII usb 3.0 hub driver not being installed.
In my post above your reply. You don't add the driver to the PE - the PE cannot detect the USB3 hardware anyway. Short version is: In the HII driver tool -- Locate the standard USB driver for the...
View ArticleClik here to view.
Re: Creating template to PXE boot and run batch file menu?
Thanks for your reply . I ended up mounting the boot.wim LANDesk provided and just editing the startnet.cmd file to point to my menu. I had to tweak some additional file paths and such, but it's...
View ArticleClik here to view.
Re: Provisioning tasks continue before first startup finishes
Thanks for your replies! I will test this as soon as I can. I'll be away for a few weeks but will test it when I get back and post results.
View ArticleRe: LD 9.5.2 Provisioning with GPT
I was wondering what your steps were for the after installing the operating system. Is yours HII and then ctos ? Your not extending the partition are any thing else in the post OS template?Thanks
View ArticleRe: LD 9.5.2 Provisioning with GPT
I was wondering what your steps were for the after installing the operating system. Is yours HII and then ctos ? Your not extending the partition are any thing else in the post OS template?Thanks
View ArticleClik here to view.
Re: Provisioning tasks continue before first startup finishes
I Seriously doubt that the ctos being in a child template matters at all. Any template that is executed basically gets flattened anyway, so this is probably not the issue. The basic problem is one of...
View ArticleRe: Blues Screen of Death during Client Install
Hi Peter. Thanks for the reply. The HP Support Assistant was already installed on the master computer when the base image was created. To fix the BSOD issue, I just uninstalled it from the master...
View ArticleRe: LD 9.5.2 Provisioning with GPT
After deploying the image, I mount the third partition as the J:. This partition is the Windows OS partition on my base image. I mount it as the J: so that there won't be any drive letter conflicts....
View ArticleRe: Blues Screen of Death during Client Install
Glad to hear you've got it working now!
View ArticleRe: LD 9.5.2 Provisioning with GPT
Hi, It just does not boot up to windows after the Configure target OSI do the HII and all drivers load without errorI do a bcdboot with a J:\windows /s S: (s is the EFI partition) I get a failure when...
View ArticleRe: LD 9.5.2 Provisioning with GPT
With the above commands using the J: dirve it is copying the boot files now to the S: drive. But when it reboots it boots into the S: and not windows now. How do I get it to boot into windows operating...
View ArticleRe: LD 9.5.2 Provisioning with GPT
Are you getting the Windows splash screen at all? I am not doing anything in my templates to set the partitions as active or copy any boot files. My base image contains the EFI partition with all the...
View ArticleClik here to view.
Re: LD 9.5.2 Provisioning with GPT
I am using the stock wim from Microsoft for the 8.1 32 bitPre-os : I wipe the drive, then create the EFI, MSR and OS partition.EFI : 300 mb mount as S: format fat32 MSR created 500OS 60 GB mounted as...
View ArticleRe: Dell Optiplex 7010 HII Driver Issue
When I point the entry to my Driver Database it does not install.However when I extracted the zip from Dell and pointed it there it worked. In my Driver Database I only put the Folder from the Dell...
View ArticleRe: Preferred Server and HII Drivers
Ludovic, I don't see anyway to tell what's going on with the credentials.
View ArticleRe: Preferred Server and HII Drivers
We finally decided to use the DPInst tool to install the drivers all the more the current HII version doesn't support unsigned drivers.Re: Provisioning with HII
View ArticleClik here to view.
Re: Dell Optiplex 7010 HII Driver Issue
You can always look at the newly installed device in Device Manager and check the drivers being used. Then only include the .cat and .sys files with the same name in your driver store. See attachment...
View ArticleRe: Issue Capturing image in provisioning.
I am experiencing the same behavior. It looks to me like the handler is trying to map to your specified URL with the credentials that are configured for your preferred server. Apparently, this is by...
View ArticleRe: LD 9.5.2 Provisioning with GPT
OK... looks like we are going down different paths. I build a thin image and capture that to deploy in my provisioning templates. It looks like you are doing a fresh install from the install wim...
View Article