How to make vboot work in LD 9.6 SP2
We've been migrating from LD 9.0 to 9.6 sp2 everything seems to be working except for VBoot. We are still using the old LD 9.0 PXE boot currently. I looked at all the methods in the community for vboot...
View ArticleRe: Provisioning UEFI Enabled Systems without Bare Metal
Good article, but I have to ask, what headaches are you running into with Bare Metal? It's pretty straightforward, even with UEFI. Ensure device is off, add device to bare metal and let the device...
View ArticleRe: Provisioning UEFI Enabled Systems without Bare Metal
Gru Specifically the headache of having to manually enter the machine into the bare metal profile, track down the MAC, assign it a task, etc. Our organization only does UEFI enabled systems in onesies...
View ArticleRe: Dell PE T410 WinPE drivers.
FYI - I had to manually inject this driver. The below process worked for me.How to use DISM to manually inject drivers into the Boot.wim
View ArticleWinPE 32bit NIC and Storage Drivers for Dell R210 II
FYI - In case you need the drivers for the NIC and storage (SCSI) adapters for your 32bit WinPE image. These worked for me. It was a super pain in the rear. NIC - Broadcom BCM57xx & BCM57xxx...
View ArticleRe: Provisioning UEFI Enabled Systems without Bare Metal
Why not use the USB provisioning boot creation tool at this point? We have use it for booting UEFI enabled devices straight into WinPE PRov.
View ArticleRe: Provisioning UEFI Enabled Systems without Bare Metal
jack.rotherham Because the create boot media tool will not use the 64 bit boot.wim. I suppose you could use that to create the media then replace the boot.wim with the 64 bit version, but in my...
View ArticleRe: Provisioning UEFI Enabled Systems without Bare Metal
Fair enough. It may have been x86 UEFI tablets that were being used in this case hence the non-requirement of replacing the boot.wim
View ArticleRe: Provisioning UEFI Enabled Systems without Bare Metal
I'd like to see that... we had a Dell Venue Pro 11 model with the Atom processor (x86 UEFI) and we could not get it to boot into WinPE through either OSP boot WIMs or MDT, thumb drive or PXE. I don't...
View ArticleClik here to view.
Re: Provisioning UEFI Enabled Systems without Bare Metal
I've been booting UEFI systems with thumb drives created by the LANDesk provisioning USB boot creation tool. No problem with UEFI or BIOS boots from the same stick. I don't see the need for this...
View ArticleRe: Provisioning UEFI Enabled Systems without Bare Metal
That process never worked for me and we had a LD engineer on site to train us, and he didn't know of a method.
View ArticleClik here to view.
Install Agent During Provisioning Problem
Using Landesk 9.6 SP2. We were using 9.5 SP2 and had no problem installing agent during Provisioning. After upgrading to 9.6 SP2 the Agent install seems to take longer and 80% of the time it hangs up...
View ArticleRe: Different WinPE versions in 9.6?
Kerhold, this is not something that we would recommend. You are welcome to test this and report your results.
View ArticleRe: Install Agent During Provisioning Problem
Do you have any logs that you could attach for when this happens?
View ArticleRe: WinPE 32bit NIC and Storage Drivers for Dell R210 II
Thanks for sharing this with the community.
View ArticleRe: Different WinPE versions in 9.6?
Hi Kerhold,LDMS won't package an older build of winPE for use, and the intent is to use the boot.wim that is built for your Core's build since file changes between different releases can create...
View ArticleRe: How to make vboot work in LD 9.6 SP2
Hi GJhorn, You are going to want to update your PXE to the same version as the core. I am not sure if I am understanding this correctly, but you disable PXE and try to get an IP from a preferred...
View ArticleRe: How to make vboot work in LD 9.6 SP2
Hi GJHorn,Are you issuing a provisioning task to a client while it is within Windows so it can vBoot? I'm unclear where your client is that it does not have an IP address, but that you are trying to...
View ArticleRe: Different WinPE versions in 9.6?
Thanks. I don't intend to use it, but my Customer asked that questions. I thought that would be the answer, just wanted confirmation. So basically that could work, but is not supported.
View Article