Re: Cannot assign drivers in HII / blue screen trap after imaging with SP1
Did you install the critical Post SP1 patch?
View ArticleRe: Cannot assign drivers in HII / blue screen trap after imaging with SP1
From the 9.5 SP1 download page...Critical Update - Must be installed on the core server immediately after SP1 InstallLANDesk has released an update to 9.5 SP1 to address an issue, where under certain...
View ArticleRe: Cannot assign drivers in HII / blue screen trap after imaging with SP1
Yes, we applied this right after install SP1. I have another thread posted on the inventory problem. http://community.landesk.com/support/message/92371#92371
View ArticleChanges to Provisioning under System configuration
I've noticed that within LANDesk 9.5 SP1 (could also be within regular 9.5) that when you Apply (Save) a Provisioning Template that it takes much longer than before. It seems like it may be doing an...
View ArticleHII not working in provisioning
Is anyone else having an issue with the hii program not installing network drivers on windows 7? I have a intel network card on a lenvo T series laptop that worked and installed on the pre SP1...
View ArticleRe: HII not working in provisioning
As I understand it, the HII in SP1 'should' do a better job at matching the drivers to hardware. It sounds like you need to do the first few steps I outlined above and see what drivers are in...
View ArticleRe: Error in provisioning when deploying image
If you are using imagex, I think you have to create the destination partitions and volumes first. I can see that you wipe the disk, but do not see that you are creating any partitions or volumes before...
View ArticleRe: HII not working in provisioning
Thanks for the suggestion. I checked the database and the necessary infromation for the driver seems to be there but still no luck. Am I right that the driver just has to be in the driver store and...
View ArticleRe: Changes to Provisioning under System configuration
Only provisioning. It seems to happen when we introduce a lot of actions under the System Configuration stage. When you apply it takes a little bit longer to save. I have installed the vulscan...
View ArticleLDMS 9.5 SP1 - Some distribution packages not working with provisioning
We are currently testing LANDesk 9.5 SP1 and I have noticed that for some reason there a bunch of distribution packages (some are .bat/others are .exe) that fail under provisioning under System...
View ArticleRe: LDMS 9.5 SP1 - Some distribution packages not working with provisioning
Try reseting the pacakge hash. Right click on the package and reset the hash file. Not sure this is the resolution.. just a guess.
View ArticleRe: LDMS 9.5 SP1 - Some distribution packages not working with provisioning
Installing 9.0 SP4 packages without dependencies won't work with provisioning. Maybe SP1 for 9.5 has the same bug. HTH, Jary
View ArticleClik here to view.
LD 9.5 SP1 HII Driver Management: Disabling Drivers
I have a driver that is causing DISM error 2 when it tries to inject it into a Windows 8 offline image. This causes the whole provisioning task to fail. I tried using the new "Disable Drivers" feature...
View ArticleClik here to view.
Capture Issues
I am having issues with my capture image, I am currently using landesk 9.5. One of the problem seems to be unless I install the landesk agent it will fail and not create the WIM file. This then causes...
View ArticleRe: HII not working in provisioning
Thanks to some help from support I found that my image had a c:\windows\lddriverstore folder. I added a line in my provisioning task to remove that before the HII ran. That fixed the problem I was...
View ArticleRe: LD 9.5 SP1 HII Driver Management: Disabling Drivers
Do you have your hiiclient log and dism log from that machine?
View ArticleRe: LD 9.5 SP1 HII Driver Management: Disabling Drivers
Eric Christensen wrote: Do you have your hiiclient log and dism log from that machine? Attached are the logs and the drivers.db3. Thanks Peter
View ArticleRe: Capture Issues
If you select image type of other, you do have to specify the path to imagex. If you do not modify the upgraded template it should continue to work. Once you edit it however, you have to change the...
View ArticleRe: LDMS 9.5 SP1 - Some distribution packages not working with provisioning
There was an issue with software distribution patckages in SP4 with provisioning. There is a patch available from support to correct the issue.
View ArticleRe: Changes to Provisioning under System configuration
When you say longer, can you be more precise? How long is it talking to save the template? Could you export and attach a copy of your template?
View Article