Re: Error in provisioning when deploying image
Review the deployimageactionhandler.log on the client in the windows\temp directory. This may point to a maptopreferrredserverhandler.log. That will give more insight into the failure. Most likely you...
View ArticleRe: LANDesk pxe boot creates an inventory entry!
When the device communicates with the PXE Rep, the rep sends the core data about the mac address and other identifiers it gets about the device. Yes it is more limited than a miniscan.
View ArticleRe: LANDesk pxe boot creates an inventory entry!
In addition, it also gives you the capbility to remote control that machine...handy for troubleshooting in other sites!
View ArticleRe: LANDesk pxe boot creates an inventory entry!
The miniscan will give you that. The machine must be in WinPE to be able to remote control. You cannot remote to the device while it is booting to the pxe menu.
View ArticleRe: Model Specific Drivers in a Provisioning Template
With USB 3.0 a new bus was created. Instead of being on the PCI bus it is on a new bus. Depending on the manufacturer, that bus can be defined differently. The reason HII doesn't add the usb drivers...
View ArticleRe: V9.5 SP1 HII using a SWD Package
Thanks for the link. This doco didnt exist when i first posted!
View ArticleInsert Script action failing to insert unattend.xml since LD 9.5 upgrade
When using a provisioning template that was working successfully under 9.0 SP3, it now fails when trying the inject the unattend.xml file. The issue appears to be with the way drive letters are...
View ArticleRe: Insert Script action failing to insert unattend.xml since LD 9.5 upgrade
Does the desktop machine has any removable drives? Probably those are already given the c: and d: driveletters. Most likely your old WinPE didn't recognize those. To start 'clean' try running the...
View ArticleRe: Error codes in ldprovisioning logs
Have you gotten anywhere with support on this. On a side note have you tried the upgrade to SP1. We are still in a holding pattern on that one.
View ArticleRe: Error codes in ldprovisioning logs
LANDesk's answer was that the issue was experienced once and noted by the US guys... They found that by not capturing Outlook and Outlook express settings the problem went away. I have not been back to...
View ArticleRe: Error codes in ldprovisioning logs
Thanks for the info. I'll have to test that out. It's unfortunate that outlook settings have a problem because the ability to carry those over is great part of the profile capture. Yes we have heard...
View ArticleRe: Insert Script action failing to insert unattend.xml since LD 9.5 upgrade
looking at x:\ldprovisioning\diskpart.txt i notice it is now stating: assign letter=N this is part of the new Win8 PE right? any reason why this is hard set?
View ArticlePXE Representative Deployment Password - LDMS 9.5
LDMS Core recently upgraded from 8.8 to 9.5 Attached are two PXE Rep scripts. 1. PXE Representative Deployment This is the system default script. This loads the environment OKuntilI add a password....
View ArticleNo GUI for apps during provisioning?
Hi, We need to use truecrpyt during the last step of system configuration during provisioning to set the local administrator password. However, it seems that provisioning doesn’t display the...
View ArticleRe: No GUI for apps during provisioning?
Hi, It is running as local system non-interactive to the desktop. Use startasuser.exe from the ldclient map to kick it off as the logged in user in case you use an Execute File action, or configure...
View Articleproblem with Variables in COPY FILE action
I am working within the SYSTEM CONFIGURATION section of provisioning on LDMS 9.5 unpatched. I need a FILE COPY action to run as one of the last steps in provisioning. The file that I want to copy to...
View ArticleCreate Bootable WinPE CD for Using OSD Script
I was told by LANDesk Support that the community could possibly provide information on creating a WinPE CD for deploying an OSD script. This would be the equivalent of selecting the WinPE Menu (PXE...
View ArticleRe: Create Bootable WinPE CD for Using OSD Script
Hi, The basic instructions on creating the boot media are perfectly valid. After creating the iso, mount the iso, and extract the \windows\system32\startnet.cmd. Edit this file to default to the boot...
View ArticleRe: No GUI for apps during provisioning?
You should make sure you use a delivery method with full interface display.
View Article