Re: How to add drivers into server for HII
You can just drop the files in, but it might be easier to create some kind of folderstructure for easier reference. Frank
View ArticleRe: Elitepad 900 Windows 8 deployment ?
I just looked at the partitioning I told you to use and realize I made a mistake. It will work as is, but the actual spec is for the Microsoft Reserved partition to be 128 MB, not the 350 like I said....
View ArticleRe: WinPE 4.0 and USB 3
torpedor, that is perfect! The problem that we have right now is that the Intel USB 3 device is "hidden" behind the USB 3 Root Hub, so it doesn't always show up correctly in WinPE. When 9.5 SP2 comes...
View ArticleRe: HP 840 unable boot into WinPE
I second the question. Has anyone been able to get this to work?
View ArticleRe: HP 840 unable boot into WinPE
To really troubleshoot this you would need the Device IDs of the devices in question. In 9.5 SP1 (which I know is apparently not an option right now) there is a parameter in HiiClient that will dump...
View ArticleClik here to view.
Re: WinPE 4.0 and USB 3
Hi Mach6, Thanks very much for the informative reply! I managed to fix the issue for the USB3 driver by following torpedor's advice and assigning it to the 'USB Root hub' (thanks). I am still having a...
View ArticleRe: HP 840 unable boot into WinPE
PCI\VEN_8086&DEV_155A&SUBSYS_198F103C&REV_04PCI\VEN_8086&DEV_155A&SUBSYS_198F103CPCI\VEN_8086&DEV_155A&CC_020000PCI\VEN_8086&DEV_155A&CC_0200
View ArticleWinpe with Dell 7440
hello, i have a new latop (DELL E7440) in my company and i would like capture an image from OSD script. i inject the network drive in the boot.wim file. i create a new windows pe configuration. i start...
View ArticleRe: HP 840 unable boot into WinPE
Perfect. I don't have an 840 to test with, but according to the device IDs it should be the file:e1d6232.inf (for Win7 x86, or WinPE 3.x)e1d6332.inf (for Win8 x86, or WinPE 4.x)e1d6432.inf (for Win8.1...
View ArticleRe: Winpe with Dell 7440
Sounds like you don't have the proper ethernet drivers for the E7440 in your WinPE image if you're not getting an IP address when in WinPE.
View ArticleRe: WinPE 4.0 and USB 3
Hi peter.wood, Looks like the package is attempting to install, but is failing. One thing that makes provisioning troubleshooting a bit harder is that we have our "handlers" (the guys that do the...
View ArticleClik here to view.
HII issues
I am trying to deploy to a Dell 7010 using provisiong and HII. Everything goes well until you get to the HII part. It will install all the drivers and then get to the end and say it failed. Does anyone...
View ArticleRe: HII issues
Looks like it is trying to install an unsigned boot critical driver. A boot critical driver would be something like a hard drive controller that obviously Windows can't run without. Can you find a...
View ArticleRe: Question - Multicast an Image
Hi all, There is now a solution to this problem. If you are using OSD with Multicast in 9.5 (any SP level) you will need to mount the boot.wim image and modify the startnet.cmd file. There you'll...
View ArticleRe: HP 840 unable boot into WinPE
Thank you Mach6. When I added this driver to the WinPE I made a "minor" error and only put the .inf file in the folder where I chose it for the PE. I have since learned if you do not have the...
View ArticleRe: WinPE 4.0 and USB 3
Hi Mach6, Sorry for the late reply. I've had a look at that log but it never updates when the HII template is ran - the only logs which update are the ldProvision and HIIClient files. Are there any...
View ArticleRe: HP 840 unable boot into WinPE
Thanks for the information. Once I added that driver, I got a new message: "An error occurred with the boot selection. Verify media is present and try again." So I followed these steps: Enabled legacy...
View ArticleRe: Winpe with Dell 7440
the drivers installed in the laptop is the same in the winpe image.
View Article