Re: WinPE 4.0 and USB 3
Hi Brian, Did you manage the fix this issue? I can get the Windows 7 x86 image working by injecting the usb3 drivers but I can't get it to work in Windows 7 x64. Thanks,Peter
View ArticleRe: WinPE 4.0 and USB 3
On one of the models, the USB 3 root hub driver didnt detect/install but the controller did. I copied the infs over to lddriverstore so the root hub would detect/install.
View ArticleRe: LDMS Provisioning Task Stops
We had a problem with our OS Provisioning halting at various places along the process (we are also on 9.50 SP1). It turned out there is a problem with using SD inside of the OS Provisioning process. I...
View ArticleRe: LDMS Provisioning Task Stops
Thanks for the reply! I ended up deleting the running provisioning task and running again. Worked on all 3 this time. Appreciate the response.
View ArticleRe: LDMS Provisioning Task Stops
Just a general thing. In order to use a software package you must install the LANDesk agent. Are you using a specific agent design that has no locally scheduled tasks for policy check and vulscan or...
View ArticleRe: LDMS Provisioning Task Stops
Actually we created a Provisioning Agent per the OS Provisioning doc that Roy Meyer wrote. That agent has its date set to June 3000 so it well never run vulscan. Once all of the builds are in place we...
View ArticleRe: Boot wim does not download from PXE Rep on Dell E7240
Nevermind, Confirmed with Dell this is a hardware issue. They dropped off another machine with the same configuration and bios and it boots without issue.
View ArticleRe: SysPrep doesn't run on OEM W7, but yet it's "required"? Why?
Sadly correct, because it doesn't solve the problem of SysPrep being unavailable on OEM Windows. Have to figure some workaround for that. So far no luck. g
View ArticleRe: LDMS Provisioning Task Stops
I have the same issue. Typically halts after a reboot. I hadn't placed a ticket on it yet since it was looking partly environmental. It's looking less environmental and more like LANDesk related. After...
View ArticleHP 840 unable boot into WinPE
We are demoing an HP 840 and we have tried every 840 g1 nic driver in the WinPE 3.1 (LANDesk 9.5 no SP). We are not in a place to update to 9.5 SP1 which has WinPE 4.0. Is there anyone out there that...
View ArticleHow do I determine which templates are referenced by other templates?
I have two templates created for the same program. The program was recently updated, and I modified the template that we are currently using for our provisioning process to reflect the new program...
View ArticleRe: Elitepad 900 Windows 8 deployment ?
In 9.5 SP1 you should be able to use the Create Partition action that does the whole thing (create, format, mount, etc.) all in one. Your template for UEFI should look like this: Create Partition:GPT...
View ArticleRe: Elitepad 900 Windows 8 deployment ?
Hi Mach6, perfect! Thanks for that! One question regarding BCD. Will FixWindows.exe work with windows 8 or to do the "bcdboot.exe C:\Windows /s S": job ? Or is fixwindows.exe no more useable anyway ?...
View ArticleRe: How do I determine which templates are referenced by other templates?
You can edit the template and check the "Included by" section. That will display a list of all the templates that include that one.
View ArticleRe: Elitepad 900 Windows 8 deployment ?
The point of FixWindows is to move partitions around so you know that the OS drive is C:. In ImageW (or other sector based deployment scenarios) that can be an issue. With ImageX (and other file...
View ArticleRe: WinPE 4.0 and USB 3
I think that would work as well. I went for the cleaner method of just copying the USB3 driver folder to the lddrivers to allow for a change/fix later that wouldn't require me to back-track. Thank...
View ArticleRe: WinPE 4.0 and USB 3
Good point. Copying the drivers is also a very viable workaround with few, if any, problems. Seems like a good, clean solution while we fix the underlying problems.
View ArticleRe: How do I determine which templates are referenced by other templates?
That resolved my issue, thanks a lot!
View ArticleClik here to view.
Re: WinPE 4.0 and USB 3
This worked for me. Had the issue of the "Intel(R) USB 3.0 Root Hub" not installing the driver for the Dell E7240 and E6640, even though I'd specify the proper iusb3hub.inf driver to be assigned to...
View ArticleRe: WinPE 4.0 and USB 3
Hi Mach6, I'm still having difficulty installing 2 different drivers using the information in this thread. 1. Fingerprint driver for a laptop. I have packaged this when I deploy it through a scheduled...
View Article