Re: Core patch LD95-CP_BASE-2013-0228.exe breaks SEP11 in ImageX images
Hi Cyberdemon, I think if you disable 8dot3name after formatting the partitions, it will resolve your issue. See:http://community.landesk.com/support/message/94404#94404 I had the same issue with...
View ArticleRe: PXE Menu items disappearing or corrupting
I made the change and as far as I can tell they haven't been disapearing anymore. Thanks MrGadget.
View ArticleProvisioning Boot Media error
Hi, I was using the provisioning boot media to boot devices and install OS and it was working fine until this morning. Suddenly fthis morning I am not able to boot from provisioing media. I get...
View ArticleRe: What is the required format for importing Bare Metal Servers through a...
I had read that but I was still looking for more of an example. Also, the only way I could get it to work was with column headers. Here is an example of what I got to work. Device Name,NIC...
View ArticleRe: System Configuration Steps not Running (Provisioning)
I rearranged most of my commands to appear in the Post OS section. However, nothing will continue on once it gets to the the System Configuration section stil. The job also shows up as Active and never...
View ArticleHII assigning new drivers of a specific PC model and maker to old PC's models...
Hi there, I'm facing a critical issue with HII (LDMS 9.5 sp1) when adding new drivers for different computer models that I have tested and approved for these specific PC's models (Dell Latitude E6x40,...
View ArticleLandesk 9.5 sp1 Hii Best Practices
We are looking into Hii for imaging moving forward.....I can't find a document explaining the process Is there a lot of issues with 9.5 sp1 hii? I've seen quite a few unanswered posts regarding blue...
View ArticleRe: Provisioning works with PXE, but not with "Boot to Managed WinPE" (boot.wim)
Hi, I have the exact same behaviour here (But if I create a boot Stick or a BootCD I cannot run a provsioning task. The Problem is, the computer boots from the stick/bootCD loads the driver, and the...
View ArticleRe: Landesk 9.5 sp1 Hii Best Practices
I have been struggling with similar issues. It appears HII is not injecting the drivers even though it completes with success. I have attempted to assign drivers to certain models with no luck and have...
View ArticleRe: Wake on LAN to provision Bare Metal machines fails from LDMS console
After receiving feedback from LANDesk support and trying it in my lab, it seems to send the WOL, the information must be placed in the bound adapter So CSVImport.exe must save the scn file with these...
View ArticleRe: Wake on LAN to provision Bare Metal machines fails from LDMS console
Given this information, would you mind updating the following document so that the next user experience will be better? http://community.landesk.com/support/docs/DOC-23532 Perhaps even attach a sample...
View ArticleLDMS not talking across scopes
I am having an interesting problem. In our environment the Core is attached to our main domain and our main domain talks to other PCI compliant remote domains within our network over secure VPN...
View ArticleClik here to view.
Surface Pro 2 Imaging
Does anyone have any guidlines on how to image a MS Surface Pro 2 device. I know that it is UEFI which we have never done. Thanks!
View ArticleRe: System Configuration Steps not Running (Provisioning)
Could you try without the setupcomplete.cmd copy?
View ArticleRe: Surface Pro 2 Imaging
Haven't done it myself, but from what I remember of discussions MS didn't make this capable of PXE boot so you need to look at using USB or DVD boot media to get into provisioning. Mark McGinnMarXtar...
View ArticleRe: LDMS not talking across scopes
LANDesk doesn't have any particular intelligence being used in this area so it is most likely a standard networking issue. Take a look at this document as it mentions the ports that LANDesk uses....
View ArticleLDMS Provisioning Task Stops
I recently provisioned 150 HP/Lenovo laptops using LDMS 9.5 SP1 with HII. For some reason, 3 HPs stopped during the middle of the provisioning template. The task quit in the system configuration...
View ArticleRe: LDMS not talking across scopes
Thank you for this Mark, I will post back with an update if/when we find the problem.
View ArticleIs it possible to NOT mount optical drives in WinPE?
Hello all, When running provisioning templates from a PXE boot we encounter errors sometimes once we get to the "Inject Script" portion. Through some troubleshooting we found that the WinPE...
View Article