Re: PXE Boot 9.5 for Lenovo T440s
LANDesk support informed me that the following applies. PXE Boot menu differences:PXE Menu = mtftp transferPrivisioning = tftp transfer The issue for me is that the mtftp does not work for the Lenovos....
View ArticleRe: Unable to load provisioning template
I tried setting up the preferred server but it would not authenticate with our read only LD account. I tried the Admin credentials and that worked. The account is fine and has permissions on folders...
View ArticleRe: Deploying an Image fails to inject unattend.xml (Provisioning)
Looks like going in and updating any of the x86 references to amd64 in the unattend.xml resolved the issue. Very odd why that same xml works in OSD deployments but not in the Provisioning Deployment.
View ArticleRe: Wake on LAN to provision Bare Metal machines fails from LDMS console
Yes you are correct that at minimum you only need the following for WOL to work with the CSVIMPORT: Device Name = %1% Network - NIC Address = %2% Network - TCPIP - Subnet Mask = 255.255.255.0 Network...
View ArticleClik here to view.
Re: Core patch LD95-CP_BASE-2013-0228.exe breaks SEP11 in ImageX images
-Caveate: Audit mode captured ImageX images. So, i wanted to share with you, what actually fixed this. To say the least, I was > < this close in giving up on LANDesk/ImageX. So, my assumption is...
View ArticleSystem Configuration Steps not Running (Provisioning)
I have been slowly making progress in the Provisioning conversion of my current OSD scripting. The slight caveats in the process have been getting me into trouble. Currently, my process will Perform...
View ArticleRe: Wake on LAN to provision Bare Metal machines fails from LDMS console
I've used network monitor to capture a trace for the packets sent from the core console to the client node created with CSVImport, and no WoL packets whatsoever are sent from the core console to the...
View ArticleRe: Wake on LAN to provision Bare Metal machines fails from LDMS console
What does the console.exe.log say? Are there any excerpts in it that pertain to the WOL attempt?
View ArticleWindows 8 Image
I just created a windows 8 master image using Landesk 9.5 sp1. I created it on a 40GB partition and successfully deployed it however I need to make a change then, capture it and re-deploy it. I am...
View ArticleRe: System Configuration Steps not Running (Provisioning)
What version LANDesk are you running?Do you have the LANDesk agent in your image?After running the Unattend.xml, do you have network; can you ping the core server? Frank
View ArticleRe: System Configuration Steps not Running (Provisioning)
I'm running LD 9.5 SP1The LANDesk Agent is not part of the image.The system has network connectivity through-out the process.
View ArticleRe: System Configuration Steps not Running (Provisioning)
At the end of the Configure Target OS, it will copy some files to c:\ldprovision. Are these there? It will put the command to continue provisioning in c:\windows\setup\scripts\setupcomplete.cmd. Is it...
View ArticleRe: Boot wim does not download from PXE Rep on Dell E7240
Ensure your wireless radio switch is set to off, and you have a good network connection (wired) , you may also want to reboot your PXE Rep. Regards
View ArticleRe: System Configuration Steps not Running (Provisioning)
They are there. ldprovision.exeldprovisionasuser.exe Where should these be called from? I don't have that set in the XML anywhere. also setupcomplete.cmd is present in c:\windows\setup\scripts...
View ArticleRe: Windows 8 Image
Thanks for the suggestion, I downloaded the trial but still would not let me resize the partition. I guess I will have to just create a new image.
View ArticleRe: Windows 8 Image
Download Ubuntu or Linux Mint and use GParted or use GPArted Live.http://gparted.org/livecd.php Also, when you deploy your image to make the changes and recapture for new image you can copy your OSD...
View ArticleRe: Wake on LAN to provision Bare Metal machines fails from LDMS console
This is the console log. --------------------------------------------------------------------------------------------------------12/06/2013 20:21:12 INFO 1944:17 RollingLog : ICMPComplete status =...
View ArticleSysPrep doesn't run on OEM W7, but yet it's "required"? Why?
I understand the purpose of SysPrep for generalizing a machine, or deploying via a script or whatever. But SysPrep refuses to run on OEM versions of Windows 7. That being the case, is there some...
View ArticleRe: SysPrep doesn't run on OEM W7, but yet it's "required"? Why?
Sysprep is required to inject the landesk client into your image. if you are using provisioning, you could also use a unattended setup. this should work with oem too. another way you could integrate...
View Article