Re: Inject Script fails in provisioning
You will need to open a case with LANDESK Support to get help with this.
View ArticleRe: OSD Capture Script Issues
The first step in that document: Step one: Create an image with OSD. The instructions are circular and impossible to follow as the problem is, first off, creating the image in OSD. It is running...
View ArticleRe: OSD Capture Script Issues
Not sure if this helps but I used to use the ImageW to capture/deploy images. I use a 100MB System Partition as the 1st Partition on the drive, and then the 2nd Partition is my Windows Partition. I...
View ArticlePatch System = Scan only = What then???
Hi all All our OS deployment templates have Patch system as the last action under system configuration. They all set to Scan Only. I tried and tried to get a good explanation on what this means and all...
View ArticleRe: Patch System = Scan only = What then???
Have a read of this document. It contains the answers you are looking for. How to Detect and Install Patches within Provisioning
View ArticleRe: Does LANDesk 9.6 has the capability to deploy Image without connecting to...
There is a discussion with some pointers on how to create a successful disconnected template @ Its on my test list but have not had time to try it out as yet.
View ArticleRe: Patch System = Scan only = What then???
Thank you for suggestion. I have had read that article. Scan only - Will only report vulnerabilities, but not remediate any. What does that mean? It will scan that system and do nothing about it?...
View ArticleSeparate system partition is missing with task make bootable
Hi everyone, i have a little problem with my provisionning, i can't make a system partition and i get the error : An operating system wasn't found. try disconnecting any drives that don't contain an...
View ArticleRe: Patch System = Scan only = What then???
tarasula, Scan only means that it will scan the system for any vulnerabilities, virus definition updates, applications to block, etc (these are customizable so you can mix or match). It will then...
View ArticleRe: Provisioning Task failing after try 40 of 40
I had this problem just now with LANDesk 9.5 SP2. It came down to the scopes for my users. I was using an LDAP query for my scope. When I PXE booted a bare metal device - it was not in an LDAP...
View ArticleRe: Provisioning Task failing after try 40 of 40
We did. We do scopes based on OU/LDAP location so technicians can only see PCs in their location. We then had to create a "Provisioning Scope" for PCs being Provisioned. For this one, it's PCs w/ an...
View ArticleRe: Provisioning Task failing after try 40 of 40
I found several threads that all ran into this same issue. Plenty of ways to get around it. "Computer"."OS"."PreBoot OS" = "WinPE" AND "Computer"."Inventory Server" = "CORENAME" Catches PXE booted...
View ArticleRe: Separate system partition is missing with task make bootable
I don't bother with the Remove Partition and Set Active actions in my template. I just have an execute action that runs Diskpart with a script that I inject. Then I use bcdboot to make the system...
View ArticleRe: Issue Capturing image in provisioning.
Have you tried using the FQDN of the preferred server? Make sure your preferred server entries match the path exactly as they are specified in your capture image action. If you're using...
View ArticleRe: Separate system partition is missing with task make bootable
PARTITION ### Type Size Offset Partition 1 Primary 100MB 1024KBPartition 2 Primary 465GB 101MB Regards, Aurélien
View ArticleRe: Separate system partition is missing with task make bootable
Put in the textbox "Id de la partition" the number "2" because Partition 2 is your windows and you have set 1.
View ArticleRe: Separate system partition is missing with task make bootable
Sorry i don't understand, I have to switch id partition 1 to 2?
View ArticleRe: Separate system partition is missing with task make bootable
https://community.landesk.com/support/servlet/JiveServlet/downloadImage/2-104823-57280/modelebl.png You uploaded this image. Try the following:1. Open your template "Windows7_ImageDeploy_HII [...]"2....
View Article