Deploying an Image fails to inject unattend.xml (Provisioning)
We have begun to convert all of our existing OSD scripts into the newer Provisioning method. I had a little trouble with the Image Capture but was able to get that to work. We are now however stuck...
View ArticleRe: Deploying an Image fails to inject unattend.xml (Provisioning)
If you haven't already, try using the sample templates in here as your starting point. Provisioning is powrful but almost impossible to work out what is necessary unless you have a starting point....
View ArticleRe: PXE Rep stalls on Lenovo X230 laptop at the MTFTP start
Hey Jim, Just a workaround that we have found for a similar issue to this with the newer T440 series of Lenovos.Our T440, T440s, T440p did the exact same thing, if we chose Managed PE or WinPE Menu it...
View ArticleRe: Deploying an Image fails to inject unattend.xml (Provisioning)
That is the one I based mine off of. I was informed that I should not map the image share or the image tool location since they are on the preferred server though. Other than that I had used that exact...
View ArticlePXE Menu items disappearing or corrupting
I am running SP1 9.5. Since upgrading I have been noticing an increase of OSD scripts that when run aren't starting as well as scripts actually not showing up on the menu. On the PXE Boot menu...
View ArticleRe: PXE Menu items disappearing or corrupting
This happens when you save a script and the owner is you, it has to be saved as plublic user. I believe you right click go to info and change owner to public user.If you make changes (edit) make sure...
View ArticleProblems with Software Deployment in provisioning templates (since 9.5 SP1)...
Since we use LD 9.5 SP1 we have problems with the Software Deployment in provisioning templates.The Template seems to be installed succesfully. The logged provisiong-process in the console shows that...
View ArticleRe: Capturing OS stuck at Boot Server IP - WinPE Menu
Yes, the PXE Representive deployment log would be helpful. Please post that log.
View ArticleRe: Capturing OS stuck at Boot Server IP - WinPE Menu
Thank you for your response: Here is the log as requested, hope it helps in obtaining a solution....
View ArticleRe: Provisioning tasks don't auto boot
What are you using as the identifier in your bare metal import? I've always had best success with MAC address. However, are you certain nothing is getting in between with a different MAC address (such...
View ArticleRe: Capturing OS stuck at Boot Server IP - WinPE Menu
Please do the following for me: 1. On the PXE, rep, run "PxeConfig.exe" which is in the C:\Program Files (x86)\LANDesk\PXE\System folder on 64-bit PXE reps or C:\Program Files\LANDesk\PXE\System...
View ArticleClik here to view.
Re: Trying to Capture an Image from a ThinClient
I've tried every NIC driver that I could find that has anything to do with the NIC from the T5740, tried them from HP website, and from broadcom website. All with the same luck, it just hangs at this...
View ArticleRe: Trying to Capture an Image from a ThinClient
I'm checking around LANDesk here to see if anyone has some ideas. Perhaps they will chime in.
View ArticleRe: Trying to Capture an Image from a ThinClient
Thank You Dave I really appreciate it!
View ArticleRe: Trying to Capture an Image from a ThinClient
Thompsont, Does the machine hang at the Windows startup screen, or does it eventually go to a blank screen? If it hangs at that screen, Windows 8 may not support the hardware on that thin client....
View ArticleRe: Problems with Software Deployment in provisioning templates (since 9.5...
Same issue here.Try to deploy a single machine per task, seems that adding more then one machine in a provisioning task "breaks" the software distribution.
View ArticleRe: Trying to Capture an Image from a ThinClient
I've seen problems similar to this when the client machine doesn't have enough RAM to fully load the WinPE RAM Disk. How much RAM is in the machine? Any chance you can add RAM and try it? Windows PE...
View ArticleRe: Trying to Capture an Image from a ThinClient
bcstring, yes now the machine just hangs at the windows startup screen, this is actually after I hit f8, choose WinPE Menu, its loads the boot.wim file, then hangs here. I have a T5730 which is running...
View ArticleRe: OSD multicast fails in LDMS 9.5 SP1
There is a LANDesk Open Defect "TFS 74255" for this issue.
View ArticleRe: PXE Menu items disappearing or corrupting
Thanks. I'll try changing them to public user to see if it keeps them from disappearing. -Jonathan
View Article