LANDesk 9.5 SP1 - What Happened to the LDMain Share?
We recently updated to LANDesk 9.5 SP1 by installing clean on a new Windows Server 2008-R2 VM. (Essentially we did a "side-by-side" migration. Our previous LANDesk core server, running LDMS 9.0SP4,...
View ArticleRe: Trying to Capture an Image from a ThinClient
Maybe you have more RAM reserved for the GPU on the newer thin clients. It certainly sounds like a RAM issue but it could be a driver conflict as well.
View ArticleClik here to view.
Re: Capturing OS stuck at Boot Server IP - WinPE Menu
Thanks Dave, I have applied the steps you recommended, the steps differs slighty, probably version differences. We run LDMS V9.5. We still only get up till the screen as per attached pic. Let me know...
View ArticleRe: Capturing OS stuck at Boot Server IP - WinPE Menu
Do *any* of your computers work? Another thing to be sure of is that your computer is processing Inventory scans. Check the \ManagementSuite\LDScan folder to see if there are scan files stacked up in...
View ArticleUnable to load provisioning template
Hi, We have just upgraded from Landesk 9 SP3 to 9.5 SP1 and I am unable to get provisioning working again. I used to add devices as bare metal and then schedule a deployment and leave it to it. I am...
View ArticleRe: Problems with Software Deployment in provisioning templates (since 9.5...
Same issue here. Has anyone contacted support?
View ArticleRe: PXE Rep stalls on Lenovo X230 laptop at the MTFTP start
Hi mghilardi,We attempted your work-around, but we attain the same failed results. Thanks for your reply. I had high hopes for this interim solution
View ArticleRe: PXE Rep stalls on Lenovo X230 laptop at the MTFTP start
That's dissappointing. In the interim you can always attempt to boot from media. You can take a flash drive and run the boot.wim from there. Use the Create Provisioning Media from your Operating...
View ArticleRe: PXE Rep stalls on Lenovo X230 laptop at the MTFTP start
Try this: 1.On the PXE, rep, run "PxeConfig.exe" which is in the C:\Program Files (x86)\LANDesk\PXE\System folder on 64-bit PXE reps or C:\Program Files\LANDesk\PXE\System folder on 32-bit PXE...
View ArticleRe: PXE Rep stalls on Lenovo X230 laptop at the MTFTP start
JJ Take a look at this diagram or the PXE process (from the Microsoft point of view) as it may shed some light on where the problem is for you....
View ArticleClik here to view.
Re: PXE Rep stalls on Lenovo X230 laptop at the MTFTP start
Dave, Good catch on that one. I had forgotten that. HOWEVER, I tried it on my own environment a couple of years ago then spent a couple of weeks trying to figure why things were not behaving as they...
View ArticleClik here to view.
Partition drive using ImageX to deploy Windows 7
Greetings, We are running LDMS 9.5 sp1 and are getting our feet wet with trying to successfully deploy Win7 using a Provisioning Template. We are in hopes to use provisioning as a mass deployment...
View ArticleRe: Partition drive using ImageX to deploy Windows 7
I'm not a expert on imagex nor provisioning. I've only used imagex doing a manual PXE Boot.. First after creating the partitions you have to format them because imagex is file based.Second Imagex only...
View ArticleRe: Partition drive using ImageX to deploy Windows 7
Thanks for responding. I understand what you are saying, but were stuck on creating the partitions. Not sure if I'm selecting the correct options when doing so as when you add a partition action in...
View ArticleClik here to view.
Re: Partition drive using ImageX to deploy Windows 7
Yes you don't have to capture the reservered partition unless you want a 2 partition drive. Just capture the os. I did not make this provisioning template, one of the other guys here did. I'm going to...
View ArticleRe: Problems with Software Deployment in provisioning templates (since 9.5...
Hi Snaebjorn,we have an open case (#00668765) now escalated to PSE.There is a defect and you can refer to it (TFS 89097).2 workaround possible:A: you can create a provisioning task with only a machine...
View ArticleClik here to view.
Re: Problems with Software Deployment in provisioning templates (since 9.5...
Hello amagi, wie don't have more than one Client in our tasks and have this problems....we only have one task for our complete application-set...because we use a provisioning template to deploy our...
View ArticleClik here to view.
Re: Capturing OS stuck at Boot Server IP - WinPE Menu
Hi, I am not sure what you mean by: "Do *any* of your computers work?" I have checked the ldscan folder and there is about 60 *.tmp files in there. I have since restarted the Inventory Service but this...
View ArticleRe: Capturing OS stuck at Boot Server IP - WinPE Menu
I think the key here lies in the error "An error occurred while releasing interface Loopback Pseudo-interface 1 : The system cannot find the file specified" This is definitely not normal. This...
View ArticleWhat is the required format for importing Bare Metal Servers through a CVS file?
I would like to pre stage about 1500 computers for provisioning and I would like to import those devices as a Bare Metal Server by importing a CVS file. What headers need to be used in the CVS and so...
View Article